************ 1961 Rome Fiumicino Airport Scenery **************

by Michael Schneider, Tom Gibson, and Mike Stevens

Version 1, 12/18, for FS2004 only.

Support available at the CalClassic Discussion Forum:
http://calclassic.proboards.com/board/3/calclassic-discussion

NOTE: This file, AI traffic, and lots of classic airliners can be 
downloaded free from Tom Gibson's California Classics at - 
http://www.calclassic.com/ 

Michael Schneider created most of the buildings at the airport.  Tom Gibson and Mike Stevens created the ADE file, oilspots, ramp equipment, and vehicle placement, and landclass and terrain files.

This scenery requires you to download and install the Classic Libraries v4 package (files 1 and 2) and EZ Scenery libraries; see below for installation instructions.

History of Rome Fiumicino from Wikipedia:  https://en.wikipedia.org/wiki/Leonardo_da_Vinci%E2%80%93Fiumicino_Airport

"The airport was officially opened on 15 January 1961, with two runways, replacing the smaller Rome Ciampino Airport, which remains in service for some low-cost airlines as well as domestic and charter operations. Despite being officially opened in 1961, Leonardo da Vinci–Fiumicino Airport had actually been in use since 20 August 1960. This was to help relieve air traffic that was congesting Rome Ciampino Airport during the 1960 Summer Olympics.[3]

During the 1960s, home-carrier Alitalia invested heavily in the new airport, building hangars and maintenance centres." 

The domestic airlines were Alitalia and SAM.
International airlines included Air Ceylon, Air France, Air India, Air Liban, Alitalia, Aerolineas Argentinas, Austrian, BEA, Middle East, Central African, Pan American, CSA, El Al, Canadian Pacific, Ghana, Iberia, JAT, KLM, Malev, Misrair, Nigeria, Olympic, Pakistan Intl, Panair do Brasil, QANTAS, Sabena, SAS, Aer Lingus, BOAC, South African, Sudan, Swissair, Syrianair, TAI, Tunis Air, THY Turkey, TWA, and VIASA.

INSTALLATION

This EXE installer will NOT create a Start Menu entry, registry entry, uninstall program
or anything else, other than copying the relevant files to the proper folders.  You may
install to a temporary folder by pressing the ... button and copying things by hand if you wish.

1. Quit FS2004 if running.

2. ***IMPORTANT*** Download and install the scenery libraries contained in the Classic Scenery Libraries v4 (files 1 and 2) as compiled by Wolfgang Gersch from http://www.calclassic.com/scenery.htm, if you have not done so already.

3. Download and install the EZ-Scenery Libraries, available from: http://www.abacuspub.com/pub/AbacusEZLibraries.exe

4.  Open this LIRF_Fiumicino_61.zip file archive by double clicking it.  You will find this text file and a file called Setup.exe.

5. Double click the Setup.exe file to start the installation.  Press 
the Run button at the warning screen.  If it doesn't find your FS2004 folder automatically, 
press the ... button and browse to it.  Then follow the instructions to install.

6.  OPTIONAL:  Mike Stevens has included simple scenery for Naples (LIRN) and Palermo (LICJ), using default buildings.  He has also created Mount Vesuvius, complete with steam coming from its crater.  This has only been tested using default terrain.  If you would like to install this scenery, copy all files in the Addon Scenery/LIRF Rome Fiumicino 1961/Naples_Palermo Scenery folder and paste them into the Addon Scenery/LIRF Rome Fiumicino 1961/scemery folder.

NOTE FOR NEXT STEPS:  If you have installed this or other sceneries before, you may have at least some 
of the required scenery layers installed.  If so, skip that step.

7.  Start FS2004, and go to the Settings/Scenery Library choice on the 
opening screen.  If you are currently flying, press Escape (Esc) and then End 
Flight to get to this screen. Look at the top portion of the list.

8.  If there is no CalClassic Landclass area listed there, click on the Add Area button.  Double click the 
ADDON SCENERY folder.  Click the CalClassic Landclass folder once.  Click OK.  Click the Move Down button
until this layer is next to your other landclass layers, or near the CalClassic Core layer, or is below
your other classic scenery layers.  Make sure that the CalClassic Core layer (if present) is BELOW all other 
classic scenery layers!

9.  If there is no LIRF Rome Fiumicino 1961 area listed there, click on the Add Area button.  Double click the ADDON SCENERY folder.  Click the LIRF Rome Fiumicino 1961 folder once.  Click OK.

10. If you have any other addon scenery for Rome Fiumicino (airports, jetways, etc.) that is not compatible with this scenery uncheck that scenery's Active box to inactivate it.

11. Click OK.  Quit and restart FS.

12. If at the main screen, choose Create Flight at the left, select desired items, and
press Fly Now.  Choose Options/Settings/Display.  Under Scenery Objects set the
Scenery Density to Dense or less (setting to Very or Extremely Dense will display modern
jetways at default airports).  Also, set the Autogen Density to Dense or less 
(any higher may display telephone poles in odd places at the airports); this will also 
simulate the less dense cities found in the era.  *Another choice* is to use the modified
terrain.cfg file, available at the CalClassic Scenery page.  Click OK.

NOTE: This file, AI Traffic for this scenery (and the world), and lots of classic 
airliners can be downloaded free from Tom Gibson's Classic Airliner web site at - 
http://www.calclassic.com

Credits:

Produced using ADE by Jon Masterson, GMAX by Discreet, Sketchup by Google,
ExcBuilder by Paavo Pihelgas, Ground2K4 by Christian Fumey, 
Instant Scenery by Konstantin Kukushkin, and LWMViewer2 by Jim Keir.
Ramp vehicles by Al Courtney
Jeeps and some tugs by Nikko Yaginuma
Classic US cars and similar vehicles by Mike Stevens
AB objects from Abacus.  
Other objects by various authors used from the Classic Libraries package.
Thanks to all!
**************************************************************************
Now the legal stuff:

COPYRIGHT 2018 BY TOM GIBSON, MIKE STEVENS, AND MICHAEL SCHNEIDER.  ALL RIGHTS RESERVED

THIS SCENERY IS THE PROPERTY OF THE AUTHORS, AND CANNOT BE 
RE-SOLD OR PACKAGED WITH ANY PRODUCT FOR SALE, WITHOUT THE 
EXPRESS WRITTEN PERMISSION OF THE AUTHORS.  THIS IS FREEWARE!!

YOU MAY NOT UPLOAD THIS FILE ARCHIVE TO ANY OTHER SERVER

YOU MAY NOT REMOVE AND UPLOAD PARTS OF THIS ARCHIVE.

IF YOU EDIT THIS SCENERY (WITH PERMISSION!) YOU MUST 
CREDIT THE ORIGINAL AUTHORS IN YOUR TEXT FILE AND INCLUDE THIS TEXT 
FILE (WITH ANY EMAIL ADDRESSES REMOVED).

THE AUTHORS ARE NOT LIABLE FOR ANY DAMAGE THAT YOU MIGHT 
INCUR AS A RESULT OF USING THESE PRODUCTS.  YOU ASSUME THE RISK 
OF USE.
