*****************************************
 FSX/P3D DOUGLAS DC-6A Super Liftmaster

 CB-16 Base Pack Package
       
 GMAX Version 1  8/2019
*****************************************

Support available at the CalClassic Forum:
http://calclassic.proboards.com/

The latest and many other aircraft are available from the CalClassic Propliner Page:
http://www.calclassic.com

Exterior built and painted by Greg Pepper, Jens Kristensen, Max, and Tom Gibson

Northern Air Cargo livery by Jim Campisi
Everts Air Cargo livery by Dave James

Flight dynamics by FSAviator - see Reference file (F10).  This FDE is not designed for AI use - it will not work.  Download AI propliners at http://www.calclassic.com/.

NOTE:  This version of the DC-6A is normally used for modern operations, since high octane fuel for the CB-17 engines is typically not available.  The only change to the model itself is the removal of the black "footballs" under the fuselage (the ADF antennas).  If you want to use this model for classic era liveries using the CB-17 engines (an example is the USAF C-118A), do this:

1.  Download and install the DC-6A CB-17 Base Pack.
2.  Copy the two model folders found in this package (the model and model.spinner folders in the DC-6A CB-16 folder) and paste back into the same folder.
3.  Rename the new Copy of model folder to model.noADF, and rename the new Copy of model.spinner folder to model.noADF_spin.
4.  Move these two new folders to the DC-6A CB-17 folder.  Specify this new model in the DC-6A CB-17's aircraft.cfg file by typing model=noADF for small spinners, and model=noADF_spin for large spinners.

VERSION 6 FEATURES:

1.  The default panel is now designed for 16:9 widescreen monitors.  If you use a different monitor refer to the Other Monitors folder in the FSX/SimObjects/Airplanes/dc6pnlKMCC folder.

2.  The two speed supercharger system is now set up by default and is available for FSX.

VERSION 5B FEATURES:

1.  The plane is now equipped with a Polar Path Compass, for using the autopilot in polar regions. Refer to the Polar Path Compass Readme.txt file in the FS/Aircraft/dc6pnlKMCC/DC6-B PANEL OPERATIONS file for details.

VERSION 5A FEATURES:

1.  There is now a checklist file available from the kneeboard (F10).

VERSION 5 FEATURES:

There are two added versions, DC-6BF models with a large crew door (with and without spinners).  There are no default liveries included for these models.

Specify these as follows:

DC-6BF, small spinners:  model=dc6bf
DC-6BF, large spinners:  model=dc6bf_spin


VERSION 4 FEATURES:

1.  There are two versions, with small and large prop spinners.  Specify these for a specific livery in the aircraft.cfg file by:

With small spinners:  model=

With large spinners:  model=spinner

2.  Opening doors.  The doors will open using the following commands:

Shift E:    Passenger door
Shift E 2:  Forward Cargo Door and Underfloor Doors
Shift E 3:  Crew Door
Shift E 4:  Rear Cargo Door

3. Interior.  This interior is not intended to be an accurate depiction of an actual interior, for close inspection.  It is adequate as you are looking in through the doors.

4.  Ground equipment. There is a ladder and forklifts.  Thanks to John MacKay for the airstairs and Nikko Yaginuma for the forklifts.

5.  Cargo.  You can display cargo in the cargo compartments by pressing the keys for the tailhook.  NOTE:  This key is not set by FS by default; you must activate it:

a.  In FS:  Options/Controls/Assignments menu
b.  Scroll down the list and find Tailhook Up/Down (if not there, choose All Commands from the drop down box above).
c.  Click on that line.
d.  If there is a keyboard entry already listed, press CANCEL and use that key combination.
e.  If no entry, press a keyboard combination to use for this command.  I use SHIFT T.
f.  Click OK. 

VERSION 3C FEATURES:

1.  To display the airstairs, you must apply the parking brake, shut down engines 1 and 2, and open the passenger door using Shift E.

2.  To display the maintenance stairs, you must apply the parking brake, shut down engines 3 and 4, and open the crew door using Shift E 3 (hold down the Shift key and press E, then release both keys and press the number 3 key on the main keyboard).

3.  You can also open the underfloor baggage doors by pressing Shift E 2.  Their main lighting is controlled by the baggage compartment light switch on the overhead panel in the 2D cockpit and the VC.  They will also come on by turning on all the lights with the L key.

4.  To display the chocks, you must apply the parking brake and shut down the engines on that side of the plane.

5.  There is some mesh deformation around the opening doors; I have minimized this as much as I am able (I'm not a GMAX expert).  Thanks to Milton Shupe, Bill Leaming, and others at the FreeFlight Design Shop for help in reducing this.

6.  The colors of the airstairs are controlled by the stairs_t.bmp texture.  It can be night lit using a proper stairs_L.bmp texture, but this has not yet been done.  The stairs_t.bmp file of the DC-6B PSA livery is plain bare metal, and can be used for any repaints that do not come with a specific stairs texture.

7.  The color of the maintenance stairs and interior cabin is controlled by the Interior.bmp file.  These can be copied to other liveries to get the color of the stairs/interior you want.  Interior textures by Manfred Jahn, modified by Frank Gonzalez and Tom Gibson.

VERSION 3B FEATURES:

1.  The CHT value displayed is now based on fuel flow (related to horsepower) instead of using the FS defualt variable, which is mostly dependent on RPM (incorrectly).  You can also click the CHT gauges to display two numbers for each engine.  The top number is the "target" CHT that will be reached eventually; the bottom number is the current CHT displayed digitally.  Click again to remove the numbers.

VERSION 3 FEATURES:

1.  Damage Module by Robert Graf.  This module has been a separate addon, and is now incorporated into the basic package.  To activate this module click twice on the NO WARN message in the FE/NAV Notepad until Damage appears.  See the separate Damage Module Readme.txt file for information on this new feature.  NOTE:  The Damage setting will remain active between FS sessions, and will affect all aircraft that use this damage system.

2.  Fuel Dump System.  There is a new FD icon on the panels.  Click this and a fuel dump subpanel will appear.  For details refer to the CalClassic Modifications page in the FS9/Aircraft/dc6pnlKMCC/DC6 PANEL OPERATIONS/Start Here.htm or FSX/Simobjects/Airplanes/dc6pnlKMCC/DC6 PANEL OPERATIONS/Start Here.htm file.  NOTE:  This gauge requires FSUIPC to be installed into your flight sim program.  Get it here:  http://www.schiratti.com/dowson.html  You must install the correct version for your flight sim version!

3.  Automatic Fuel Loading.  On the CalClassic Planner notepad page, if you plan a flight and then click on the green Total Fuel value your fuel load will be filled to that value.  The main tanks will fill first, and then when full the AUX tanks will fill (as per the fuel loading diagram in the CalClassic Modifications page of the panel manual). This will also fill your water and oil tanks.  If you already have the amount of fuel listed on the Total Fuel line then no extra fuel will be added, but the water and oil tanks will be filled.  This can only be done on the ground with engines off and parking brake set, otherwise the value will not be green and cannot be clicked.

4.  Oil and Water/Methanol Refilling.  If on the ground with engines off and parking brake set you can refill the individual oil and ADI water levels by clicking on the Oil Quantity and Water Quantity gauges.  You can also refill them all by using the Notepad Fuel Autoload feature.

OTHER FEATURES:

1.  Real prop reverse (throttle to idle, click reverse lever, power to 30" MAP, allow plane to slow down, throttle to idle to go back to forward thrust)

PANEL:

Please obtain the DC-6 KMCC Panel (for FSX) by downloading and installing the United DC-6B CB-16 Base Pack from www.calclassic.com.

SOUND:

Please obtain the sounds by downloading and installing the United DC-6B CB-16 Base Pack from www.calclassic.com.

FLIGHT DYNAMICS, FUEL PLANNING, ETC.

Press F10 and choose the bottom icon to bring up FSAviator's Reference file.

****************************************************************************
Installation:

To install into FSX or P3D see the Installation.txt file.

***************************************************************************
The DC-6 was developed as a faster, larger, and pressurized 
version of the DC-4 which first flew in 1946.  This popular 
airliner was faster than TWA's new 049 Constellation, and 
allowed one-stop transcontinental service in 10 hours.  When 
more powerful P&W R-2800 engines became available, Douglas 
decided to stretch the DC-6 by over 4.5 feet to produce the 
DC-6B.  The first DC-6B flew in February, 1951, and the first 
operator was American Air Lines.  Production of the DC-6B 
reached 288 by the close of the production line in November, 
1958.  Produced in parallel with the DC-7 series, many airlines 
found the DC-6B to be preferable to the DC-7's.  The DC-6A was 
a very similar plane designed especially for freighter service.

The reason for this preference is due to the impressive 
operating statistics of the DC-6B.  It had the best operating 
economics of any large piston airliner of it's time, and 
passengers also appreciated it's quietness, smoothness, and 
general comfort.  Douglas sold more DC-6B's than any other 
civil airliner in the DC-4 to DC-7C series, which indicates 
it's popularity with the public and the airlines.  The virtues 
of the DC-6B have endeared it to many recent operators, and 
several are still flying today.

NOTE: This plane and many other classic airliners can be 
downloaded free from Tom Gibson's Classic Airliner WEB site at - 
http://www.calclassic.com/ 


**************************************************************************
Now the legal stuff:

COPYRIGHT 2019 BY TOM GIBSON, FSAVIATOR, JENS KRISTENSEN, AND GREG PEPPER.  ALL RIGHTS RESERVED

REPAINTS:  REPAINTS ARE ALLOWED WITHOUT FURTHER PERMISSION, BUT WE PREFER THAT THEY ONLY BE UPLOADED TO TOTALLY FREE SITES - I.E. NO CHARGES OR SUBSCRIPTION FEES FOR INCREASED ACCESS.  HOWEVER, IF YOU REPAINT THE PLANE YOU MUST CREDIT ALL OF THE ORIGINAL AUTHORS IN YOUR TEXT FILE AND INCLUDE THIS TEXT FILE.  YOU MUST ALSO REMOVE ANY EMAIL ADDRESSES FOUND IN THIS FILE, AND NOT INCLUDE THEM IN YOUR FILE.  WE DO NOT SUPPORT REPAINTS.  PLEASE INCLUDE YOUR EMAIL ADDRESS IN YOUR TEXT FILE.

THIS AIRPLANE IS THE PROPERTY OF THE AUTHOR, AND CANNOT BE RE-SOLD OR PACKAGED WITH ANY PRODUCT FOR SALE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF THE AUTHORS.  THIS INCLUDES "FREE" CD COMPILATIONS WITH A CHARGE OF ANY KIND.  THIS IS FREEWARE!!

YOU MAY NOT UPLOAD THIS PLANE TO ANY OTHER SERVER, IT MUST REMAIN ON THE ORIGINAL SERVER.

THIS FILE ARCHIVE OR ANY REPAINTS MUST NOT BE UPLOADED TO A SITE OR LOCATION THAT CLAIMS ANY SORT OF COPYRIGHT ON THE FILE; COPYRIGHT REMAINS WITH THE ORIGINAL AUTHOR.  UPLOADING OF THIS FILE TO SUCH A SITE DOES NOT CONSTITUTE PERMISSION OF THE AUTHORS TO VIOLATE THESE TERMS BY THAT SITE. 

THIS FILE ARCHIVE MUST REMAIN INTACT; YOU MAY NOT REMOVE OR UPLOAD PARTS OF THIS ARCHIVE (EXCEPT FOR REPAINTS).  THIS ENTIRE TEXT FILE MUST BE INCLUDED IN ANY DISTRIBUTION, AFTER THE EMAIL ADDRESSES HAVE BEEN REMOVED.  

THE AUTHORS ARE NOT LIABLE FOR ANY DAMAGE THAT YOU MIGHT INCUR AS A RESULT OF USING THESE PRODUCTS.  YOU ASSUME THE RISK OF USE.

